JSH2602潤滑油空氣釋放值測定器

一、符合SH/T0308標準

二、主要技術參數：

壓力范圍：0～60KPa

控溫方式：進口數顯溫控儀控溫

計時方式：數顯計時器計時

空氣控溫范圍：常溫～75±5℃

水浴控溫范圍：常溫～75±1℃

水浴攪拌方式：磁力循環泵循環

空氣加熱功率：1.2 W

水浴加熱功率：2.0 W

工作電源：AC220V±10％ 50HZ

三、性能及特點：

1、儀器采用進口數顯溫控儀自動控制水浴溫度氣體溫度,數字顯示直觀,控制溫度準確可靠,精度高。

2、儀器采用二單元模式，氣路分別控制，可做單個樣，也可同時做平行樣。

3、恒溫水浴采用磁力循環泵循環攪拌，浴內溫度均勻。氣流用壓力表直接顯示空氣壓力值，壓力顯示直觀。

4、儀器采用數顯計時器自動計時，并有到時報警功能。

JSH2602 lube oil air release value tester

I. Comply with SH/T0308 standard

Ii. Main Technical parameters:

Pressure range: 0 ~ 60KPa

Temperature control: Imported digital display temperature controller

Timing: Digital display timer timing

Air temperature control range: normal temperature ~ 75±5℃

Temperature control range of water bath: normal temperature ~ 75±1℃

Water bath agitation: magnetic circulation pump circulation

Air heating power: 1.2W

Water bath heating power: 2.0W

Power supply: AC220V± 10% 50HZ

Iii. Performance and Characteristics:

1. The instrument adopts imported digital display temperature controller to automatically control the water bath temperature and gas temperature, with intuitive digital display, accurate and reliable temperature control and high precision.

2. The instrument adopts the two-unit mode and the air path is controlled separately. Single sample can be made, and parallel sample can be made at the same time.

3. Constant temperature water bath adopts magnetic circulating pump to circulate and stir, and the temperature in the bath is even. Pressure gauge for air flow directly displays the air pressure value, the pressure display is intuitive.

4, the instrument adopts digital display timer automatic timing, and has the alarm function.