產品型號：JSR3602
產品名稱：自動微量殘炭測定器(微量法)(JSR3602)
產品說明：
JSR3602自動微量殘炭測定器（微量法） 一、符合GB/T17144、ISO10370標準 二、主要技術參數： 控溫范圍：常溫～500±2℃ 控溫方式：數顯程序溫控儀控溫 流量控制：自動控制流量轉換 功 耗：≤1.5KW 輸入氮氣壓力：0.25MPa≤P≤0.5MPa 加熱速度：平均10℃～15℃/min 工作電源：AC220V±10％ 50HZ 三、性能及特點： 1、儀器采用數顯程序溫控儀控溫，控溫精度較高，且溫度顯示直觀，清晰。 2、儀器在通氮氣情況下，能夠按規定升溫速度升溫到500℃，在反應過程中生成的易揮發性的物質由氮氣帶走，留下的碳質性殘渣以占原試樣的百分數報告微量殘炭值。 3、儀器升溫到500℃后，能夠自動恒溫，自動切斷加熱爐加熱電源，使其自然降溫。 4、能自動控制氮氣流量大小及時間，無須人工監測，非常方便。 5、儀器進氣孔連接方式，采用快速接頭，非常簡捷。 6、儀器*符合國家標準GB/T17144所規定的各項條件。 JSR3602 automatic trace carbon residue tester (trace method) I. It conforms to GB/T17144 and ISO10370 standards Ii. Main Technical parameters: Temperature control range: normal temperature ~ 500±2℃ Temperature control: Digital display program temperature controller temperature control Flow control: Automatically controls flow conversion Power consumption: 1.5 KW or less Input nitrogen pressure: 0.25MPa≤P≤0.5MPa Heating speed: average 10℃ ~ 15℃/min Power supply: AC220V± 10% 50HZ Iii. Performance and Characteristics: 1. The instrument adopts digital display program temperature controller to control temperature, with high temperature control accuracy and intuitive and clear temperature display. 2. In the case of nitrogen flux, the instrument can be heated to 500℃ according to the specified heating rate, and the volatile substances generated in the reaction process will be taken away by nitrogen, leaving carbon residue as a percentage of the original sample to report the trace carbon residue value. 3. After the instrument is heated to 500℃, it can automatically maintain a constant temperature and automatically cut off the heating power to make it naturally cool down. 4. It can automatically control the size and time of nitrogen flow without manual monitoring, which is very convenient. 5. The air inlet connection of the instrument adopts quick joint, which is very simple. 6. The instrument fully conforms to the conditions specified in national standard GB/T17144. |
