JSR2501銅片、銀片腐蝕試驗儀

一、符合GB/T5096、SH/T0023標準

二、主要技術參數：

水浴溫度：常溫～100℃

控溫精度：±0.5℃

孔    數：四孔

主機功率：1 KW 

恒溫浴功率：1.15KW

工作電源：AC220V±10% 50HZ

三、性能及特點：

1、采用電熱管加熱方式，加熱速度快；

2、裝有數顯溫度控制器，溫度能控制在常溫～100℃范圍內任何一點，控溫精度達±0.5℃；

3、儀器冷凝器冷凝水采用循環恒溫水浴（冷浴）恒溫，當浴內水溫不在20±5℃范圍內時，可通過加熱或壓縮機致冷冷卻，使其達到20±5℃范圍。

4、可同時做四個對比樣。

JSR2501 copper and silver sheet corrosion tester

I. It conforms to GB/T5096 and SH/T0023 standards

Ii. Main Technical parameters:

Water bath temperature: normal temperature ~ 100℃

Temperature control accuracy: ±0.5℃

Number of holes: four

Main engine power: 1 KW

Constant temperature bath power: 1.15KW

Power supply: AC220V±10% 50HZ

Iii. Performance and Characteristics:

1. Adopt electric heat pipe heating mode, heating speed is fast;

2. Equipped with digital display temperature controller, the temperature can be controlled at any point within the range of normal temperature ~ 100℃, the temperature control accuracy up to ±0.5℃;

3. The condensate of the condenser of the instrument adopts a constant temperature of circulating thermostatic water bath (cold bath). When the water temperature in the bath is not within the range of 20±5℃, it can be cooled by heating or refrigeration by compressor to make it reach the range of 20±5℃.

4. Four comparison samples can be made at the same time.